Body soldering
replaces synthetic filling when fixing autobody panels.
Body soldering is another expression for escort loading. The action is crucial when you hope for to fill a drilled dent Emigration gap or other perforation using govern, as opposed to a synthetic thing filler. Although vanguard filling target panel holes requires bounteous skill that spreading resin-based filler and sanding, the crop is less possible to absorb moisture and else potential to ultimate longer.
Instructions
1. Sand the environment completely, attempting to remove as even loose rust and contamination as potential.
2. Activate your propane torch. Heat the nature to the akin needed to manipulate the flux without it bubbling. Experience is required with Everyone type of surface to conceive what continuance is required to accomplish this perfect heating level.
3. Apply a liberal amount of flux using the applicator brush inside the container. You have the right amount of flux if it neither bubbles nor turns bright silver. Look for the flux to be a dull grey color.
4. Break off a piece of the lead stick by twisting. Stick the lead to the application spot. The proper amount of heat and flux with allow the lead to stick on its own.
5. Soak the head of the wooden applicator in the household oil to prevent the lead from sticking. Heat the lead applied to the metal until it changes to a shiny color. Immediately press the lead evenly into the hole or deformity with the applicator.
6. Allow the applied lead to cool. Re-apply the lead filler as needed to fill the spot to your satisfaction.
Sand off excess lead by hand with 60, then One hundred grit sandpaper.7. Completely clean the area with water and cloths to remove excess flux.
