The air conditioning system in the 1996 Chrysler Sebring was equipped with EPA compliant R-134A refrigerant from the foundry. The air conditioning operation is considered a closed and sealed method, on the contrary meager leaks in the transaction Testament spare the refrigerant to escape over continuance and produce a loss of air conditioning efficiency. Restore the air conditioner to its Correct service by replacing the R-134A refrigerant that has leaked from the development. This project Testament catching the experienced internal mechanic approximately an time to integrated.
Unscrew the thumbscrew on the can tap until it no longer protrudes completed the can tap.2. Turn the engine off. Attach the hose meeting to the low side utility Harbour.
Instructions
1. Screw the can tap and gauge supplied in the installation implements securely by participation to the hose meeting as well supplied in the tools.In the 1996 Chrysler Sebring, the low side service port is located on the considerable width air conditioning wrinkle institute in the passenger side of the engine compartment near the engine's timing embrace and the strut Garret. To attach the hose to the Harbour, pull back on the locking telephone on the hose objective and push it onto the port until it locks the hose into place.
3. Start the engine. Set the air conditioning controls in the Sebring to maximum by turning the blower speed knob to medium and the temperature control knob to maximum cooling. Push the air conditioning compressor button located on the dash between the blower speed and temperature control knobs to turn the air conditioning on.
4. Screw a can of R-134A refrigerant to the can tap and twist the thumbscrew until it pierces the can. Untwist the thumbscrew and hold the can with the can tap side down to install the refrigerant.
5. Turn off the engine and disconnect the installation hose from the service port. Close the hood and test drive the Sebring to verify the air conditioning system functions properly. Add additional cans of refrigerant in the same manner until the system is full and operating properly.