6. Use a crisscross pattern to tighten the lug nuts. The wrong sequence can cause the brake drums or rotors to warp and fail. For example, on a wheel with four lug nuts, tighten in the following order: top left, bottom right, bottom left, top right.
Instructions
Determine Lug Nut Torque
1. Practice a torque wrench To gauge the lugs on your Motor lorry. While a wrench with a arrow indicator works the beyond compare, handle a dial-clicker wrench for these steps.
2. Dial the torque to a foot/lb. ratio that you are undeniable is below the lug seed specifications for your truck. Attempt to turn the lug nut. If the wrench clicks but doesn't turn the lug nut, your torque is too low.
3. Increase the torque by Five feet/lb. and test the lug nut again. Continue to increase the torque by this increment until the lug nut turns.
4. Measure lugs on all wheels and find an average to determine the specific torque needed if you don't know the appropriate torque for your lug nuts.
Tighten the Lug Nuts
5. Set the torque wrench to the correct feet/lb. for the lug nuts on your truck.
Tightening the lug nuts on your Motor lorry can aid to extend the vitality of your wheels very as the brake drums and rotors. It is critical that you tighten the lug nuts prerrogative, using the correct tools. Come next the steps below to tighten Motor lorry lug nuts appropriately.7. Tighten the lug nuts evenly. Uneven lug nuts can also warp the brake drums and rotors.
