Install the new caliper onto the rotor or bracket. Attach the caliper mounting bolts and tighten them to Thirty one foot pounds for the front and Seventy four foot pounds for the back on a Fifteen series, and Eighty foot pounds for both ends on the Twenty five series.5. Connect the brake hose to the caliper.
1. Elevate the vehicle up on the jack stand. Remove two-thirds of the brake fluid from the crackerjack cylinder. Remove the tire and revolve meeting.
2. Disconnect the brake hose from the caliper by removing the fitting bolt. Throw away the washers that are with the bolt. Plug the hose with a piece of rubber.
3. Remove the caliper mounting bolts and slide the caliper off the body. You will need to remove the outer shell of the mounting bracket to remove a rear caliper.
4.
Replacing a extreme apportionment on any machine, approximating a brake caliper on a GMC Sierra, is not an clear chore. The chassis of a Sierra is dreamboat corresponding as the Chevy Silverado, so agnate parts can be used. On the contrary, consult your mechanic or an Professional before enchanting on such considerable repairs.Instructions
Use new washers with the inlet fitting bolt. Tighten the bolt to Thirty three foot pounds.
6. Bleed the brake system. Open the bleeder valve, attach a transparent hose to it and have another person depress the pedal to remove the air.
7. Reattach the wheel and lower the car. Pump the brake until it feels firm and road test the vehicle.
