The Chevrolet S-10 pickup was a public vehicle for Chevrolet, mostly seeing of its inexpensive valuation and versatility. There are many of these yet on the course, and their owners may require to customize them with newer components. The One thousand nine hundred eighty nine imitation, For instance, came with a inventory tape deck and radio in the dashboard. By updating it with an in-dash DVD player, the Motor lorry becomes deeper fit, and its resale expense goes up further.
Instructions
1. Regulate the glove box. Remove the two screws on the fair side of the stereo using a Phillips head screwdriver. Remove the ashtray. Unbolt the stereo from the dashboard using a 1/4-inch ratchet and socket. Pull it elsewhere of the sprint and unplug the connections by fist. Establish the stereo to the side.3.
Remove the screw latest the ashtray using the Phillips imagination screwdriver. Pull the plastic sprint panel gone from the dashboard.2.
Install the metal cage included with the in-dash DVD player into the vehicle-specific sprint equipment using a Apartment lodgings head screwdriver. Strip 1/4 inch of wire off the end of the harness of the in-dash DVD player and the vehicle-specific wiring harness using wire strippers.
4. Match up the wires on both wiring harnesses and join them together with the wire crimpers and blue butt connectors. Locate the wire on the in-dash DVD player harness labeled "Emergency Brake." Run this wire to the parking brake pedal on the left side of the dashboard. Cut the single wire plugged into the parking brake pedal with the wire cutters and strip both ends of this wire with the wire strippers. Crimp a blue butt connector onto one side of the wire with the wire crimpers, and twist together the wire from the DVD player and the bare wire from the parking brake pedal, then put the pair of wires into the other end of the butt connector and crimp them together, joining the wire from the deck to the wire for the parking brake.
5. Mount the vehicle-specific dash kit into the dashboard using the 1/4-inch ratchet and socket. Plug the GM antenna adapter into the factory antenna cable in the dashboard. Plug one end of the harness you created in Step Four to the wiring harness from the S-10 then plug the other end into the back of the DVD player. Plug the antenna lead from the adapter into the back of the DVD player then push the DVD player into the dash kit.
6. Reinstall the dashboard trim using the Phillips head screwdriver.
