Steel braided brake hoses Testament not swell when under power.
High-performance and off-road vehicle owners usually interchange guideline rubber brake lines with steel braided brake lines. This type of brake edge allows high revolve driving without binding or hangup. As a Chauffeur applies strength to the brake pedal, the brake operation forces brake fluid terminated the brake lines to the vehicle's turn cylinders. Rubber brake hoses tend to expand and Business agreement as the compel increases and decreases, reducing a brake manner's know-how to conclusion the vehicle. Steel braided brake lines eliminate this expansion.
Instructions
1. Disinfected the brake cylinder where the brake wrinkle connects, besides as the solid brake string's mating surface, with a rag. Brake lines connect to the vehicle's wheels at the cylinders and custom mating surfaces to associate to the solid steel brake lines.
2. Slip the cylinder speck of the brake hose into the cylinder's brake line becoming and finger tighten the hose to the becoming. Some brake lines, depending on the base, account a copper washer. Provided so, settle the washer between the brake limit and the cylinder before slipping the brake string into domicile.
3. Tighten the steel braided brake line's cylinder nut with the correct sized flare nut wrench, usually 3/8 inch. A flare nut wrench, sometimes called a line wrench, uses five flat sides to grip five of the nut's six sides. Normal open-ended wrenches only grab two sides and often strip brake line nuts.
5. Push the brake line's nut into the mating surface and finger tighten. Tighten the brake line's nut with the correct sized flare nut wrench, while holding the mating surface still with an adjustable wrench.
4. Route the braided brake line to the solid brake line's mating surface. If the mating surface has a retaining bracket connected to it, push the brake line through the hole in the center.
6. Push the brake line's retaining clip, if equipped, onto the bracket that holds the solid brake line in place. This retaining clip holds the end of flexible brake lines still.
