A motorcycle is a boss practical thought during this duration of grand Gauze prices. Harley Davidson motorcycles typically carry Fifty miles to the gallon. Provided you hankering to combine practicality with horsepower, the Harley Davidson Road Mogul is the motorcycle for you.5. While the oil is draining, remove the oil filter. End this with an oil filter wrench.
1. Fix the oil plug. It should be on the underside of the oil pan. Settle your bucket or pan underneath it.
2. Remove the oil plug. Be careful when doing this, as the oil might be ardent. Own the oil to filter into the pan.
3. Remove your used crush washer, which is on the plug, and alter it with the virgin washer. The crush washer must be replaced during every oil alter.
4. Swab off the extremity of the oil plug. Provided this is not a Trade-mark virgin engine, be slightly wary of mammoth slivers of metal.
Sure, saving bill on Gauze doesn't balm yet whether you spend it all on maintainance, so doing some matters on your own is a worthy estimate. An apparent business to begin with is to spending money your oil.
Instructions
Do an Oil Change on A Harley Davidson Road King
It should unscrew. When you get the oil filter off make sure that the o-ring (a rubber ring around the oil filter that ensures a proper seal) came off with the oil filter. If it did not come out, be sure to remove it.6. Remove and wipe down the plastic mesh filter on the side of the engine case. Put this back in when it is clean. Wipe any sludge off the drain plug very.
7. Take a bit of new motor oil and rub it on the o-ring of the new oil filter, to ensure a snug seal. Then, using your hand instead of a tool, screw the new oil filter into place. Using a tool for this can overtighten the oil filter and damage the o-ring.
8. Take a funnel and holding it at an upright angle, pour two quarts of the fresh oil in. Then let it work through the engine a bit. Screw the plug back in, turn your engine on and let it idle for a couple minutes. Finally, turn off the engine and unscrew the plug again, and using the funnel, pour remainder of the oil in, but don't overfill the oil pan.
9. Screw the plug back in and clean up any overflow.
