Ford Explorer Sport Tracs obtain a proof engine illumination which turns on to alert you of diagnostic business codes stored in the potentiality train administration module. Once you retrieve the codes, troubleshooting the concern, and repair the crunch, the period Testament come to reset the analysis engine blaze. With the honest belongings and a scarce minutes of chronology, anyone with basic automotive repair background can reset the glowing. Never reset the flare without front correcting the corporation.
Instructions
1. Climb into the Sport Trac's front seat and remove the dust subsume from the front of the diagnostic port. The port is located just under the dashboard on the driver side. You can identify the port by looking for the black cover, which has the letters "DTC" embossed into its face.
2. Plug the scan tool's datalink cable into the diagnostic port. Most major auto parts retailers offer a wide variety of scan tools for purchase. Make sure the one you buy works with Ford OBD-II software.
3. This is usually done by selecting "YES" when the scan tool prompt appears on the scan tool's display screen.5. Complete the self test and then disconnect the datalink cable from the Sport Trac's diagnostic port.
Run the scan tool through a self test. You will need to refer to the scan tool's specific owner's manual for running a self test with your particular brand and model of scan tool.4. Clear the codes when the scan tool prompts you to do so.
Put the dust cover back over the port to prevent contamination of the port from dirt, dust and other debris.
