1. Applicability a wire brush and a cleaning product, such as tint thinner, to remove dirt and grease. Sand the cylinder lightly. With latex gloves on, sponge the surface with thinner once again.
The extreme hot potato with portrayal motorcycle exhaust pipes is that you recurrently site up with chips and bubbles due to the hovering temperature. Adoption a paint made for your purpose--or for something else that's actually burning, such as a barbeque grill. You all the more may posses problems with your tint, so acknowledge using a heat wrap on the hottest spots.Instructions
Call tape and newspaper to mask off anything you don't necessity painted.2. Buy paint that resists high heat, such as PJ1 high-temp paint. You can find spray cans of it on websites and at auto parts stores. You also can use flat black paint made for barbecue grills--it's available at many hardware stores. Spray on several light coats, letting them dry in between.
3. Behind, warm up your bike for about Fifteen minutes. Let it cool, and warm it up again for about a half-hour. This slow warming process helps the paint cure.
4. After painting, use header or heat wrap on the first Six inches or so. Even high-temperature paint will peel near the engine, and wrapping makes it look better. The wrap is available at hot rod shops.
