Most vehicles get protective plastic lenses that encompass the headlights. Over period the lenses will arouse nicks and scratches from rocks and other course of action debris. The plastic as well gets cloudy. This Testament column the size of clear that passes complete them, forming it defective to coerce at dark hours.
Instructions
1. Wash the lenses with broiling drench and a gentle soap before trying to polish them. Any dirt and debris on the lenses will detail as an abrasive and can scratch the plastic amassed. Rinse all soap off with original dilute.
2. If you allow residue to remain on the lenses, debris will stick to the plastic and the lenses will be cloudy again in no time.5. Buff the lenses lightly with an electric buffer using a foam disc or a cotton pad if they are still cloudy after polishing.
3. Polish the lenses with the plastic polish a second time. This time use a linear up and down motion. It is important to polish in both a circular and a linear motion so that you get all of the scratches.
4. Remove all remaining polish residue by using a clean soft cloth and plenty of elbow grease. Advantage a commercial polish which is approved for operate on plastic to polish the lens. Handle the polish to a Disinfected cloth and grindstone in a circular motion. Remove all the polish from the plastic.
The buffer will smooth out any remaining scratches. You might mask off the area around the lens if you use a buffer so as not to damage the paint on the car.
