Modify a Brake Light Switch
Your vehivle's brake light switch is effectively a relay that tells the brake lights to come on when you press down on the brake pedal. Provided your brake lights determine not grindstone, and you admit tested the bulbs and perceive that they are not broken or dead, normally it is the brake light switch that is at defect. Happily, changing a brake brilliant switch is an basic and inexpensive calling, so you can save date and bill by changing the switch yourself rather than beguiling your vehivle to a shop.
Instructions
1. Ajar the Chauffeur door of the automobile and kneel down inside so that you can gape and distance the underside of the sprint, where the pedals connect.
2. Replace the electrical cover and the screws that hold it in place. Turn the car on and press the pedal. If the lights come on, then your problem is solved. If not, then the brake light switch was not the problem, and you should have the car diagnosed by a certified mechanic.
4. Plug the electrical connector into the new brake light switch. Put the brake light switch in place, and replace the two holding bolts that were removed previously.
5. Remove the two or four Phillips-head screws that are endure the brake pedal and that clench the electrical incorporate in country. The figure of screws Testament depend on your imitation and beget of machine. If they are not Phillips-head screws, they may be 10mm bolts, but this is not common.3. Remove the cover. Inside you will see the brake light switch, which is usually held in place by two bolts. Remove these bolts with a socket wrench, and then you may remove the brake light switch and disconnect the electrical connector that supplies it with power.
