Apply polishing compound to the stainless steel pipe and buff the fine lines out with a buffer grinding disc.6. Repeat until you have a stainless steel pipe polished to the finish you desire.
Instructions
1. Grind down any welds that are much on the main. Applicability a grinding CD and grinder for this elbow grease.
2. Mount the main into a cylinder vice or homogenous set-up. Whether you don't hog a professional pipe vise, you can use a regular vise wrapped with a towel or fitting with a rubber cap, but a professional vise is recommended. You will be applying a great deal of downward pressure to the pipe during the polish.
3. Apply a polishing compound to the pipe. Then slide your polishing belt (120 to One hundred eighty grit) onto the pipe and around the head of a grinder (fitted with a belt wheel sized to your pipe width). Hold this below the steel pipe and move it slowly back and forth across the pipe, sanding as you go.
4. Apply additional polishing compound as needed. Then continue to use the grinding belt wheel to polish the pipe by sliding it along the pipe with steady motions.
5.Stainless steel channel doesn't eyeful all shiny and fresh equitable off the welding string. Really, it looks burnt and altruistic of charred. Polishing it Testament cede it that mirror Stop (or satin silver Stop) that makes it such an nice trappings.
