Whether you call for to convert parts commensurate a brake caliper in a Plymouth Voyager, you might duty to trial parts for the Chrysler minivan under the duplicate head. Cook up decided any replacement parts come from a reputable source and they Testament duty on your Plymouth engine.
Instructions
Remove the Old Caliper
Slide the caliper's contrary confine absent from under the knuckle's machined abutment.4. Disinfected the abutment surfaces and lubricate them multipurpose lubricant. Run a mist of water over the surface and use a damp rag To cleanse them.
2. Unscrew the attaching bolt on the brake hose to disconnect it from the caliper. Plug up the border with a inconsiderable abundance of rubber. Toss absent the copper washers, as you Testament require to bag late ones upon meeting.
3. Disconnect the caliper handle pin bolts securing the caliper to the steering knuckle. Slide the caliper slowly out from the knuckle.1. Lift the front foot of the vehivle securely on a jack stand and remove the wheels. The Plymouth Voyager apart has calipers on the front brakes, on account of it uses drum brakes on the rear axle.
Never dry clean brake parts because of asbestos risk.
Install the Replacement Caliper
5. Place the replacement caliper over the brake pads and rotor. Make sure you don't damage the caliper seals or guide pin bushings from the steering knuckle bosses.
6. Install the guide pin bolts and the brake hose to the caliper. Use new washers with the brake hose's fitting bolt.
7. Fill the brake master cylinder with fluid. Connect the brake bleeder valve to a container of fluid with a rubber hose and have another person remove air from the system by using the brake pedal.
8. Install the wheels back on the van. Attach the lug nuts to half their full torque before lowering the van, then finish tightening them.
9. Set the brake pads. Pump the pedal until it feels firm. Test the brakes out on the road.
