Attach the contravening wire from the lighting to the opposite terminal of the automobile battery.3. Sincere the fuse panel inside the automobile.
1. Strip the ends of the assured and cynical wires on the lighting, so you carry approximately 1/2 inch of exposed copper wire.
2.You good installed aftermarket lighting to your machine or Motor lorry and instantly you call for to associate it to the battery. You Testament longing to establish the lights to turn off automatically when the ignition is off. This money of hook up prevents you from accidentally leaving on the aftermarket lights and draining the van battery.
Instructions
Notice that there are two very small spots on each fuse where the plastic is peeled away and you can see the metal of the fuse.
4. Begin methodically touching the wire to the tops of each fuse and checking to see if your device turns on. The car should not be turned on for this step.
5. Identify a fuse that does not allow your device to come on with the car off. Hold the wire against it and start the car to verify that your device does come on when the car is started.
6. Connect the lighting device to the fuse. Pull the fuse out and place the wire in the side of the fuse socket before the fuse, then put the fuse back in place.
