Friday, July 24, 2015

Replace Emergency Brakes Inside A Saturn Vue

5. Complete the installation of the brake shoes by reversing the removal steps.



1. Finish which type of emergency brakes your Saturn VUE Testament occasion. Emergency brakes typically service by activating the accepted braking manner on the driving wheels. The emergency brakes for all versions of the Saturn VUE handle the drum brake shoes on the rear wheels.


2. Hoist the vehicle and remove the brake drum with a socket wrench. Disengage the adjuster spring from the tab on the adjuster actuator and the brake shoe. Remove the adjuster actuator and go back spring from the brake shoe.


3. Disconnect the parking brake cable from the parking brake lever with a socket wrench. Remove the brake shoe hold-down springs, retainers and adjuster from the brake shoes. Detach the horseshoe clip that retains the parking brake lever to the brake shoe so you can remove the parking brake lever and wave washer from the brake shoe.


4. Lubricate the adjuster meeting, brake shoe contact pads, brake lever pin and contact surfaces with formidable temperature, silicone brake lubricant. You should further apply a thin coat of lubricant where the adjuster actuator contacts the brake shoe.


Emergency brakes were originally used to speck a vehicle during a failure of the typical brakes. Nevertheless, they are pdq used primarily to care for the vehicle from Stirring while parked thanks to the public brakes on a Saturn VUE infrequently fail. Emergency brakes most much duty to be replaced as a arrangement of disuse, which can creator the components to rust and sieze.

Instructions