Chevrolet introduced the Cavalier in 1982. The One thousand nine hundred ninety one Chevrolet Cavalier came equipped with either a 2.2-liter in-line four-cylinder engine or a 3.1-liter V-6 engine. The Cavalier was replaced in Two thousand four by the Chevrolet Cobalt. The inner door panel on the Cavalier had essentially the corresponding workings, regardless of if it was installed in a two- or a four-door pattern. Cavaliers with jotter windows came equipped with a window Eccentric person rather than switches.
Instructions
1. Roll the window down almost.
Remove the wiring harness from the back of the door panel bezel by handwriting. Remove the door handle bezel from the panel.3.2. Bare the door and sit in the seat adjoining to that door panel. Remove the door utilize bezel screw with a Torx- or star-bit Chauffeur, then slide the bezel forward while holding the door hold absent with your comp participation. Whether your Cavalier is equipped with faculty door locks, sole slide the bezel forward slightly, so that you can distance the back of the bezel.
Involve a GM window Eccentric person Emigration thing match to the window crank application, into the imitation of the grip. Proceeds the spring clip between the mould and the window Eccentric person meeting by wiggling the clip. Pull the window Eccentric person utilize off by participation. Provided your Cavalier is equipped with ability windows, skip this method.
4. Remove the door puller arm rest screw caps from the door panel. These trim caps can easily be removed with a flat-head screwdriver. Remove the door puller arm rest screws using a Torx-bit or star-bit Chauffeur. Remove the door puller arm rest from the door panel.
5. Remove the door panel body clips from the detachable panel at the bottom of the door, using a door panel removal tool or small pry bar. Gently pry the panel loose from the door, then remove the detachable panel completely.
6. Remove all of the trim fastener screws using a Torx-bit or star-bit driver. Pull the door panel free from the door frame, using a door panel removal tool or small pry bar. Remove the door panel by pulling it upward to release the upper door panel fasteners, then inward toward your body.
