Adding a custom exhaust to your vehicle can be as well rewarding. It not one adds to the sound output of the vehivle, on the contrary can too add additional horsepower, giving you aggrandized performance in the manner. Nowadays's exhaust kits come in a bolt-together fashion such that any consumer can install them Homewards with handwriting tools. It may be easier to chop the stock exhaust into small sections, in which case, you can do so with the reciprocating saw.4. Slide one of the sections of tubing from the Pypes kit over the axle and slide it over the stock exhaust tubing.
Conceive decided that the vehicle is secure before you crawl underneath it.
2. Reference the directions with the Pypes exhaust utensils to conclude where you chalk up to chop the works exhaust. Employ the tape degree to boast that spot, then mark the spot with a permanent marker.
3. Install the metal cutting blade in the reciprocating saw and cut the stock exhaust at the mark you made in step 2. Spray penetrating lubricant on the stock exhaust hangers and pry out the exhaust from the hangers, using the 24-inch pry bar. In this condition, the project vehicle is a Two thousand two Chevrolet Silverado and a Pypes bolt-on dual exhaust operation, on the other hand the formation is coincident for other vehicles.
Instructions
1. Lift the vehicle, using the jack, and distance it on jack stands.Slide the clamp included with the Pypes kit over the end of the tubing and tighten it down using the 3/8-inch ratchet and socket. Repeat this process with the other section of tubing.
5. Slide the muffler into the exhaust hanger, using your hands, and then slide the muffler into the two pipes from the Pypes kit and clamp them, using the clamps from the kit and the 3/8-inch ratchet and socket.
