Friday, June 19, 2015

Switch The Energy Window Motor For Any 1997 Ford Taurus

Instructions

1. Disconnect the battery on your Taurus by turning the firm terminal bolt in a counterclockwise course, then placing the ajar terminal aside.


The 1997 Ford Taurus was manufactured with a capacity window regulator, which moves the glass with a insufficient electric Engine. This Engine can wear elsewhere and fail. The criterion backyard mechanic can transform it in approximately Thirty minutes.


Effect not let it touch metal.


2. Remove the door panel by turning the screw on the inside of the interior door grip counterclockwise, then removing the screw in the triangular inset condign ahead of the door ear. Turn the door lock screw counterclockwise and remove it. Pull the door panel freebie of the pop rivets that occupation it to the metal, starting at the corner and firmly tugging at the clear chop of the panel until the unit is cuffo. Allot the panel aside, absent from the endeavor field.


3. Unplug the faculty window Engine from the wiring harness adapter by pulling the plug apart after releasing its hire with a screwdriver.


4. Remove the Engine's mount bolts that clinch it to the window regulator by turning them counterclockwise. The gears extreme the Engine are meshed into the regulator on the contrary Testament disengage whether pulled directly away.


5. Change the motor with a new unit by pressing it into the gears, then turning the mount bolts clockwise. Make sure to match the gears up to each other as you mount the motor.


6. Reattach the wiring harness by pushing the plugs together until you hear a snap.


7. Replace the door panel by pressing it firmly into the pop rivets, making certain that each one catches the door metal at the proper hole. When the panel is in place, secure it with the mounting screws (door handle and triangular section) by turning them clockwise. Replace the door lock toggle and turn it clockwise.


8. Reconnect the battery terminal by turning the bolt into the battery's positive adapter in a clockwise direction. The metal is soft, so do not over-tighten the bolt.