Applicability coarse thread to repair the stitching on a tonneau incorporate.
You can repair the stitching on a tonneau encompass as stretched as all of the virgin textile is in admirable shape. The keys to repairing your tonneau contain are using the due thread, sewing way and supporting the vinyl. To repair a tonneau incorporate so the Joint lasts, advantage ponderous UV protected thread, pop to hit the commencing thorn holes when sewing and corner a sturdy table beside the sewing mechanism to influence the weight of the essence.
Instructions
1. Locate the industrial sewing engine to assemble a quite extensive stitch. Thread the computer using the UV protected thread. Sew a infrequent inches on the scrap vinyl. Compare the stitch length on the vinyl to the stitch length on the tonneau encompass. Adjust the stitch length as needed to receive the twin stitch length used on the tonneau insert.
3. Position the tonneau cover on the side table and sewing machine stand so you can slide it under the sewing machine's presser foot without picking it up again.4. Cut a piece of double-sided tape the length of the opening and slide it into the gap between the tonneau cover fabric layers.
2. Trim off loose threads in the damaged world of the initial tonneau embrace Joint using the scissors. This will save you the extra work involved with picking them out of the tight stitching on the repaired seam later.
Peel off the tape's backing and press down on the layers. This will not create a secure bond, but it will help hold the seam closed so you can sew it without pins.
5. Slide the tonneau cover under the sewing machine presser foot. Position the needle's tip to overlap the existing seam by one inch, with the point directly above the needle hole. Lower the presser foot.
6. Sew slowly, trying to hit the original needle holes. If you are having a hard time hitting the original needle holes, at least keep the new seam directly above the original needle holes. Overlap the stitching on the end of the repaired seam by one inch.
