Loosen and remove the nut using the box wrench. Hold the stem to keep the cord from turning as you loosen the nut.4. The peanut vastness on the cord Testament be contradistinct between models, however the replacement channels is basically the equivalent for all the Polaris models.
Instructions
1. Stadium the Polaris ATV on consistent ground in an globe with quota of fluorescent. Permit the engine to chilled provided it is clement so that you don't burn yourself.
2. Remove the four Phillips sense screws from the corners of the metal encompass that the cord is prospect outside of using the screwdriver. Pull the metal encompass off the engine. Unwrap the cord from enclosing the turn wheel completely.
3. Spin the turn wheel using your hand until the nut securing the cord is at the top of the wheel facing you. Grab the metal stem on the cord with the pliers.
The pull launch on your Polaris four wheeler is the one shot street to begin the engine, so provided it is broken you must interchange it. The cord you pull is connected to a turn revolve at the end a metal cover that the cord comes absent of. The cord is connected to the turn spin by a metal peanut on the purpose of the cord.Pull the cord off the turn wheel and through the hole on the metal cover. Keep the nut just in case the new cord did not come with one. Insert the metal stem on the new cord into the hole on the metal cover. Insert the stem into the hole on the turn wheel.
5. Tighten the nut onto the stem the opposite way than you removed it. Spin the turn wheel counterclockwise until you hear the spring lock into place. Wrap the new cord around the turn wheel. Make sure that the cord does not overlap itself. Replace the metal cover to the engine. Replace and tighten the screws to secure the cover to your Polaris's engine.
