Instructions
1. Exercise a liberal bigness of urethane primer to the away of the fresh windscreen on the frit band.The windscreen on your Chrysler Plymouth one needs to be replaced when you bear a stone chip or crack in the windscreen that is larger than One inch in length. When you've removed the windscreen, there is a defined case that Testament essential to be followed to install the windscreen on your Plymouth. Provided you don't install the windscreen properly, the glass won't adhere to the frame.The frit band is the nigrescent strip running environing the edge of the glass.
2. Fit the rubber trim moulding enclosing the line of the windscreen glass.
3. Disinfected the frame of the vehicle where the decrepit windscreen was located by trimming the urethane on the vehicle down to Three millimetres with a razor.
4. Disinfected the frame where the windscreen will go with a cleaning brush. Make sure the frame is clear of debris.
5. Apply the urethane sealant to the window frame where the new windshield glass will go. Use an electric caulking gun as opposed to a standard one to receive a more even bead of sealant. If the sealant is not laid properly or evenly, you may have trouble getting the glass to adhere properly, which could result in a leaky windshield.
6. Align the top, bottom and sides of the windshield to the frame of the Plymouth and press the glass into place. You may need the help of an assistant for this part because windshields for Plymouths are rather large. When aligning the windshield, it may be best to set the bottom of the windshield in place firs. Have an assistant hold it at the bottom to keep it from sliding, while you press the top in place. Allow the urethane to cure for Twelve hours.
