A evil ignition switch can argument a machine not to begin. Replacing the switch is relatively not difficult, if you perceive determine it; the step varies from manufacturer to manufacturer and from base to example. Luckily, replacing the ignition switch in a 1999 Acura Integra solitary takes a infrequent minutes provided you differentiate what you're doing. Disconnect the electrical connector on the back of the switch. The connector is underneath the steering wheel, in the area revealed by removing the panel and cover.3.
Unscrew the four screws holding the lower panel and cover to the steering column. Remove the panel and cover.
2. Car stuff shops take replacement switches and can assortment one in provided they don't have the one for your One thousand nine hundred ninety nine Integra in stock.
Instructions
1.Turn the key to "O".
4. Remove the two small bolts that hold the switch in place and remove the switch.
5. Replace the switch, bolt it in place and reconnect the electrical connector. Close up the steering column. Turn the ignition off and remove the key to ensure your switch is installed properly.
