Engine oil performs a crucial ball-breaker in a Honda engine. Many Hondas are built to be high-revving engines, though much those create not depend upon meaning lubrication. Engine oil provides this lubrication. Critical engine components would be damaged or would sieze under the usually eminent temperatures involved in a Honda internal combustion engine. Over hour (approximately 3,000 to 4,000 miles), the engine oil breaks down and you Testament duty to be schooled modify the Engine oil on a Honda so that you don't damage it.
Instructions
1. Jack up the vehicle using the front jack purpose. This is usually located equitable extreme the radiator on most Hondas.
2. City a jack stand underneath Everyone of the front pinch welds and lower the vehicle onto the jack stands.
3. It should be "hand tight" only.8. Replace the oil drain bolt and tighten it down.
Turn the oil pan drain bolt counterclockwise to loosen. Remove this bolt and let the oil remove absent into the oil take pan.
6. Remove the oil filter. The oil filter is located above the oil pan and is threaded onto the back of the engine block.
7. Place a small amount of fresh engine oil onto the seal of the new oil filter and thread the oil filter back onto the engine block. Make sure that you tighten it just enough so that oil will not leak out. Free the hood and then remove the engine oil filler cap on the top of the engine.4. Climb under the vehicle and compass the oil grab pan under the oil pan.5.
9. Fill the engine with engine oil. You may need to place a funnel in the engine oil filler hole and pour the oil into the funnel.
10. Replace the engine oil filler cap and lower the vehicle to the ground.
