Brake Rotor
A properly maintained braking process is leading for the safety of you, your passengers and others on the plan. A fatiguing articulation on your Two thousand five Dodge Grand Caravan, brake rotors want to be checked regularly to make safe that they are in worthy working establishment, and must be replaced prior to the opportunity of failure. With the genuine tools and burden a mechanically inclined adult can moderate their own brake rotors, saving on labour costs that would be spent at an Car repair shop.
Instructions
1. Stadium your Dodge Grand Troop on a comparable surface and activate the parking brake.4. Remove the lug nuts and slide the wheels off. Establish them aside. Be careful not to lose the lug nuts.
This makes it easier to receive them off when the tires are off the ground.
3. Jack up the front of the motorcar until the front wheels are no longer touching the ground. Apartment jack stands under the frame and lower your Cart gently onto them.
Field blocks carry on the rear wheels to prevent the car from rolling.2. Exercise the lug wrench to loosen the lug nuts on the front wheels a unmarried turn.
5. Remove the two mounting bolts that secure the disk brake caliper to the steering knuckle. On some models these hurting for a customary wrench or socket, while on others you Testament applicability a 7mm Allen wrench. Slide the bolts away, creation notice whether one is longer than the other, and their placement.
6. Slide the disk brake caliper off of the brake rotor and hang it absent of the method with a wire or bungee cord. Call caution not to Blop the caliper or hang it by the brake path. A damaged brake line will result in total loss of braking power.
7. Remove retaining clips from wheel studs, if present. Pry these off with a flat head screwdriver.
8. Pull the brake rotor off of the wheel studs. They can become stuck over time. Use a pry bar or hammer to receive them of if necessary. You will not be reusing these rotors; damaging them is not an issue.
9. Slide the new brake rotors on to the wheel studs and replace retaining clips. Do not hammer or drop the new rotors, as they may warp and cause braking problems on your van.
10. Slide the brake caliper on the new brake rotor, aligning the bolt holes on the caliper with the bolt holes on the steering knuckle. Screw in the caliper mounting bolts in by hand, and then tighten them with a wrench or socket.
11. Reinstall front wheels and tighten lug nuts in a crisscross pattern.
