Replace only one spark plug at a time to avoid mixing the wires up and creating engine problems by having the wires firing off in the wrong locations.3. Use a ratchet and socket set to unscrew the spark plug using a counterclockwise motion.
Instructions
1. Cleared the hood of your 2000 Ford locus and set the Glimmer plugs on the back and front sides of your engine. Pull the Glimmer plug wire directly off the spark plug. A gentle pull should pop it right off. Then trace the wire to its other end at the ignition coils and use the same pulling motion to remove the wire completely.
2.Latest Glimmer plugs can elevate the health of your Two thousand four Ford Cynosure' engine.As electrodes on your Glimmer plugs wear absent over generation, the voltage needed to bridge the hole and kindle the fuel grows considerably. This can engender the engine to withstand starting or yet fail to begin at all. Changing your plugs Testament make safe that your engine operates at an optimum aligned and your ignition process continues to operate properly.
Use a wire brush to remove any debris inside the spark plug boot.
4. Insert the new spark plug into the boot and screw it in with your hand as far as it will go. Use your ratchet and socket set to tighten it into place.
5. Replace the spark plug wire by snapping it into place at its endpoints in the ignition coil and the spark plug. Repeat this process for the remaining plugs.
