Although changing the brakes on your One thousand nine hundred eighty nine Jeep Cherokee appears effortful, it is absolutely easier to interchange the brakes on this particular design than on most vehicles that ability a consubstantial model. The brake pads that come equipped on all four wheels of your Jeep are relatively effortless to interchange, and anyone with preceding automotive repair evidence should caress comfortable completing the mission Homewards with customary tools. It is definitely a cheaper alternative to the repair shop.
Instructions
New "Shoes" for your Jeep Cherokee
1. Unbarred the hood on your '89 Jeep Cherokee. Unscrew the embrace for the brake fluid reservoir with a flathead screwdriver. Stand your Jeep with the jack and then lower it onto the jack stands.
2. Remove the lug nuts from the wheels with a lug aficionado wrench. Remove the wheels.
3. Choose one corner to attempt on. The brake caliper straddles the rotor. Incorporate your flathead screwdriver between the upper component of the caliper and the rotor. Push it back and forth to seperate the two components.
4. Set the two retainer bolts that secure the caliper to the mounting bracket. Remove the bolts with the 1/2-inch operate ratchet and socket. Slide the caliper over the top group of the rotor. Secure the caliper to the frame of your jeep with some rope. Pull the spent brake pads gone of the caliper.
5. Compress the caliper with the C-clamp and install your replacement brake pads into the caliper. Pull the caliper back over the rotor and bolt the caliper mounting back in put.
Use the jack to lift the Jeep off of the jack stands. Set the stands aside and use the jack to lower your Jeep to the ground.7. Replace the brake fluid reservoir cover.6. Push the circle back onto the axle and transform the lug nuts with the lug stone wrench. Applicability the alike procedure to moderate the pads on the remaining three wheels.
Start your engine and pump on the brake pedal repeatedly for one minute to seat the pads correctly.
