Confirmation an Ignition Switch
Your ignition switch provides an electrical locution to the starter Engine allowing you to begin your vehicle's engine. The ignition switch on some vehicles is allotment of an integrated anti-theft method. When you moderate the ignition switch, you Testament must To possess your ignition explanation reprogrammed. This is usually single available complete your vehicle's dealership. Before replacing anything, on the contrary, you can cook a clean assessment of your ignition switch to evaluate the stage.
Instructions
1. Extended the fuse panel under the steering spin and pull the fuse for the starter expression using the fuse pullers in the panel.
2. Test the metal strip in the fuse to fabricate persuaded that the strip is not burned or damaged. If it is damaged, replace the fuse with a working component of the same amperage.
3. Open the hood and turn the dial on the voltmeter to "Volts." Touch the red lead on the voltmeter to the positive terminal on the battery. Touch the black lead on the voltmeter to the frame of the vehicle. The voltage readout on the voltmeter should read 12.6 volts. If it reads less than Twelve volts, your battery is dead, and you need to replace it.
If the engine does not crank, and you hear a "click" when you first turn the key to the "III" position, then your ignition switch is not the problem. If your engine does not crank, and you do not hear a "click" when you turn your key to the "III" position, then your ignition switch is broken, and you need To possess it replaced.4. Put the ignition key into the ignition switch and crank the engine. If the engine cranks, then your ignition switch is obviously working fine.
