Pull the starter out by hand once you have removed both of the mounting bolts. Compare the old starter to your replacement, making sure they are physically identical before proceeding with the installation of the replacement unit.7. Hold the replacement starter in position and thread the mounting bolts through the starter flange and into their mounts.
Provided all else is working properly, the engine Testament launch and stay running. Provided you hear a whirring din or a grind when you turn the principal or no sound at all, odds are you keep a defective starter Engine. Anyone with basic automotive repair familiarity can alter a starter in approximately an date.
Instructions
1. Up thrust the front purpose of the F150 off the ground with the floor jack. Distance the two jack stands under the front lot of the F150's frame and then lower the Motor lorry onto the jack stands.
2. Dehiscent the hood and disconnect the dissension battery cable confine from the battery using the battery wrench. Push the cable off to the side where it can't accidentally contact the battery during the repair formation.
3. Climb under the front passenger side of the F150 with the socket establish. Allot the starter, which bolts to the side of the engine, where the transmission telephone housing meets the back side of the engine block.
4. Unbolt the starter ground wire and wiring harness using the socket locate. Act the wires aside.
5. Grasp the thing of the starter with one participation while removing the two starter mounting bolts with the other, using a socket allot to cause so. Never let the weight of the starter bear down on the loose bolts.
6.
Convert a Starter in a 1997 Ford F-1501997 Ford F150s demand a starter in trail to receive the engine running. When you turn the ignition explanation to the engender position, it closes an electronic progression, which turns on the starter. The Engine ejects a gear from the nose cone, which spins the flywheel on the engine.Tighten them down with the socket set. Remember to never let the weight of the starter hang on the loose bolts.
8. Attach the ground wire and starter wiring harness in reverse of disconnection.
9. Lower the F150 off the jack stands with the floor jack and then reconnect the negative battery cable using the battery wrench.
