Yet though hinge pins are one of the smaller components in a Dodge Motor lorry, it's important that they be in admirable working establishment. Damaged hinge pins may decision in your Dodge truck door squeaking, sagging or all the more existence unable to conduct and rapid equitable. Whether ignored, the resulting poorly aligned Dodge Motor lorry door may pull and goal damage to the Motor lorry's protest. Replacing your Dodge Motor lorry's hinge pins is a calling most Motor lorry owners can cook themselves. As of 2010, the hinges for one door could be replaced for less than $10.
Instructions
1. Arena your Dodge truck on a Apartment lodgings surface.3. Bonanza the backside hinge pin. (It is the lower great pin that is affliction the door's lower hinge pieces connected and in lay.) Allot the backside hinge pin's tip--it Testament be pointing down.4. Compass the punch against the gratuity of the bottom hinge pin.
Construct confident the parking and emergency brakes are busy.2. Deposit the deficient towel or blanket over the jack stand or five-gallon buckets. Sincere the affected Motor lorry door and benefit the jack stand or buckets to aid the door while you interchange the hinge pins.
Gently hit the punch with the hammer until the hinge pin is dislodged and easily removed from the hinge. Allowance the hinge pin in the hinge for now.
5. Find the top hinge pin. (It is the top long pin that is keeping the door's upper hinge pieces connected and in place.) Locate the top hinge pin's tip--it will be pointing up.
6. Place the punch against the tip of the top hinge pin. Gently hit the punch with the hammer until the hinge pin is dislodged and easily removed from the hinge.
7. Remove the top and bottom hinge pins from their respective hinges.
8. Ensure the hinges are still aligned and in place so the new hinge pins can easily be put in place.
9. Insert the new hinge pins into each of the door hinges. Ensure they are placed in the hinges as the original hinge pins were: the upper hinge pin tip should point up, while the bottom hinge pin tip should point down.
10. Secure each of the new hinge pins with the punch.
11. Place the new locking rings onto the tips of each of the new hinge pins. Strike the locking rings with the hammer to ensure they are tightly fastened onto the hinge pins.
12. Discard the old hinge pins; put all your tools away.
