An engine block flush Testament bright built-up rust and Dregs from your engine.
An engine block flush is a else sweeping flush than can be accomplished with a traditional radiator flush. Before induction, you Testament commitment to test what the recommended type and compound of antifreeze is for your build and replica vehicle. Having the required assortment prepared and on help Testament conceive the burden simpler. A chemical flush can be purchased to cooperation in this manner whether desired. Directions for account Testament vary from product to product so come next their directions carefully.
Instructions
1. Lawns the vehicle on a comparable surface safely elsewhere from any children or pets.
2. Grant the vehicle's engine to cool completely before proceeding.
3. Lift the hood and gaze the hoses connected to the radiator. Provided they leak or are damaged, they Testament duty to be replaced.
4.13. Shut off the engine and let it cool completely. Check the coolant level and add additional coolant if it is needed.
6. Disconnect the radiator hoses from the radiator. Use either the screwdriver or the pliers depending on the type of hose clamp being used.
7. Redirect the hose that connects closest to the bottom of the engine so that it will drain into the drain pan.
8. Insert the garden hose into the radiator hose connected closest to the top of the engine. Turn on the water supply and allow fresh water to flow through the engine block until if is free of rust and sediment.
9. Turn off the water and allow the water in the block to drain out.
10. Reconnect the radiator hoses and close the drainage petcock.
11. Refill the cooling system by adding fresh coolant through the radiator fill hole.
12. Replace the cap on the radiator fill hole and start the engine. Allow it to run for several minutes.
Domicile the empty pan under the vehicle's radiator positioned to clutch the coolant when the petcock is opened.5. Remove the radiator cap and open the drainage petcock. Let the coolant drain until the flow stops.
14. Discard the used coolant in a safe manner that complies with local law.
