The Two thousand six Ford F250 door panel is in accommodation to supply a Disinfected observe to the Motor lorry's interior and to protect the window and lock mechanisms inside the door. When one of the components inside the door or panel fails, remove the panel to filled the repair. Removing the inside door panel on a Two thousand six Ford F250 is relatively effortless and peerless requires the custom of a rare tools.
Instructions
Front Door Panel
1. Pry the mirror gap incorporate, the plastic insert persist the side-view mirror, away from the door panel with a flat-head screwdriver.
Loosen and remove the mounting screw using a Phillips head screwdriver and pull the crank from the door panel.9. Put the flat-head screwdriver underneath the trim panel reflector to pry it from the door panel. Use a Phillips head screwdriver to remove the two screws holding the door panel in place. Loosen the mounting screw with a Phillips tendency screwdriver and pull the Eccentric person gone from the door panel.
3. Takings the flat-head screwdriver and benefit it to lever the bent window switch toward the front of the panel, then upward and away of the door panel, provided equipped with authority windows. Disconnect the wires plugging into the window switch and remove the switch from the Motor lorry.
4. Further the flat-head screwdriver to pry the courtesy headlamp or reflector from the door panel. Disconnect the wires plugged into the rear of the courtesy light, whether relevant.
5. Loosen and remove the two screws securing the panel to the door's frame. Bonanza one screw remain the now-removed courtesy luminous and the other above the armrest, near the front.
6. Pull up on the door panel to cuffo it from its frame and pull the trim absent from the door.
Rear Door Panel
7. Practice the flat-head screwdriver as a lever to the capability window switch, whether equipped with power windows, and pull the switch from the door panel. Unplug the wiring harness from the switch.
8. Remove the window crank cover from the crank, if equipped with manual windows, exposing the mounting screw securing the crank.2. Appropriateness the flat-head screwdriver to pry upward on the window Eccentric person involve, whether equipped with jotter windows, where the Eccentric person connects to the door panel. Push the comprehend aside to expose the mounting screw.
Locate one screw directly above the rear of the armrest and the other behind where the reflector usually sits on the panel.
10. Pull upward on the door panel to remove the panel from the frame and pull the panel away from its frame.
