Instructions
1. Disinfected the gloss appropriate thoroughly so that you can clearly observe the rusted areas where the metal has chipped off.Whether a van's whitewash appointment gets chipped and the naked metal underneath isn't protected, rust can habitus up on the metal. Whether the rust is left untreated, it can spread and eventually eat down the metal, destroying the automobile's bodywork. It's relatively accessible to remove rust from brief emulsion chips.2. Mask off areas near the rust that you don't appetite to damage by removing the rust.
3. Spray a petroleum-based lubricant on the rust and then employ skilled steel wool to sand elsewhere the rust, rinsing occasionally with water and a rag to see if the rust has been removed.
4. If the petroleum-based lubricant doesn't remove the rust, use a rust remover such as naval jelly. Apply the rust remover to the rust and let it soak in. Do not get any of the rust remover on nearby paint; it may damage the paint finish.
5. After the rust is removed, clean the bare metal with mineral spirits and use touch-up paint that matches remainder of the car's paint. This ensures the rust is prevented from reappearing on the metal.
