Gauze receptacle.
The Gauze vehicle on a One thousand nine hundred eighty one Chevrolet Silverado pickup is mounted on the out of the frame, between the rocker panel on the cab and the frame itself, and is unreal of metal. Over date, these tanks can corrode from rust, or amuse damaged in accidents, and that funds that you'll gain to Blop the cistern and interchange it. Whether the gray-haired vehicle has a gap in it, place a drain pan underneath the tank to catch any fuel that spills out.2. Crawl underneath the truck and locate the fuel filler hose on the gas tank. Remove the hose clamp on the line using the flathead screwdriver, then pull the filler neck off using your hands.
This can be done on most trucks without lifting up the Motor lorry, and the peerless concept that makes this ball-buster is the weight of the vehicle.
Instructions
1. Ride the Motor lorry until the Gauze gauge reads as low as practicable to assemble removing the receptacle easier.Repeat the process on the vent tube hose.
3. Set the wood block on top of the jack pad on the jack, then lift up the jack until it contacts the bottom of the gas tank. Unbolt the tank from the truck using the 3/8-inch ratchet and socket, then slowly lower it until you can access the top of the tank. Have your assistant hold the tank steady so it doesn't tilt one direction or another.
4. Disconnect the electrical connections on the top of the fuel tank using your hands. Then lower the tank the rest of the way out of the chassis.
