Gallop a utility knife around the entire perimeter of the moulding to chop through any layers of paint or wallpaper that may be attached to it or any drywall that may be stuck to the back of the moulding. Wear work gloves to protect your hands while you cut, and safety goggles to protect your eyes while you are looking up at what you are cutting.2. Work the wood chisel in behind the moulding at its lowest point, closest to the floor.
Instructions
Removing Door Moulding
1.Provided your homey remodeling project involves replacing your door molding, then you Testament need to remove the fossil molding. This may sound agnate an Unceremoniously project, on the other hand whether it is not done right and carefully, then you could cook damage to the drywall extreme the molding and produce your venture preferable than you expected. Over the senescence, molding may predispose painted over or wallpapered consequent to and the elements can practise it adhere to the drywall. Correct Emigration techniques can aid you save lifetime and capital on your project.
The area closest to the floor is exposed to moisture from feet and other elements that may make it more difficult to remove. Once you get the moulding started from the bottom, remainder should come off relatively easily.
3. Use the wood chisel to carefully pry the moulding away from the wall. Use a rocking back and forth motion to receive the moulding to lift easier. Work your way up and down the moulding piece until it becomes loose enough that you can pull it off by hand.
4. Pull the moulding off the door frame, being careful to avoid the nails.
5. Use the claw hammer to remove the finishing nails that are sticking out of the door frame. If the claw hammer cannot remove a nail, use vice grips to remove the nail by gripping tightly on the nail as close to the frame as possible and turning the nail with the grips until it comes out.
