Disconnect the wires from the climate controls and locate it aside.3. Fix and remove the four screws holding the stereo in settle. Replacing the stereo on any Toyota Tundra is an light project that takes a infrequent basic tools and the true parts.
Instructions
1. Disclosed the hood and disconnect the anti battery cable. Airy the parts boxes and verify all of the parts are included.
2. Pry the climate direction module out from the sprint with positive impulse applied at the backside of the panel.
The Toyota Tundra Motor lorry, comparable most trucks, lacks punch from the works stereo. Replacing the works tendency unit lets you add a subwoofer, video or an iPod doc. The stereo, which is moulded into the sprint on models from Two thousand five and following, requires custom replacement sprint panels.Pull the radio outside carefully and disconnect the hazard illumination switch and the wires extreme the stereo.
4. Install the hazard light switch into the new cover on models with molded stereo faces. Connect the wiring harness adaptor to the original harness and let it hang from the dash.
5. Secure the radio into the Toyota radio mounting kit and plug the wiring harness and antenna wire into the back of the new head unit. Slide the stereo and mounting kit into the Toyota Tundra dash and secure it in place with the four original screws.
6. Reconnect the negative battery cable and turn on the radio. Verify the speakers and controls are working properly and replace the climate controls and additional trim.
