1. Bare up the door which contains the damaged regulator. Manipulate a Phillips-head screwdriver to remove the mounting screws which clench the door panel in corner.
The window regulator in your Jeep is used to assist modification the window up and down with the aid of a Engine. Whether your regulator stops working right, you Testament be unable to securely unfastened or quick your window. To avoid this, you should gaze to remove your regulator to either reattach it in the genuine fashion or alter it altogether.
Instructions
On some models, you may include to remove bantam plastic covers to accretion access to the screws.
2. Remove the screws that are constant to the door employ. Pull the door utilize absent to boost access to the door handle rods. Disconnect the rods and remove the full door handle assembly.
3. Place a block of wood or solid object in the access panel of the regulator to prevent the window from coming down as you remove the regulator. Use a wrench to remove the bolts that hold the motor in place. Lift the motor away from the door assembly.
4. Remove the nuts that fix the regulator in place. Remove the bolts that hold the regulator to the window with a hex wrench. Lift the regulator away from the window.
5. Follow the removal Steps in reverse to reinstall the regulator in the correct way or replace it altogether.
