Subsume a Broad, Apartment lodgings dye scrapper between the interior door panel and the steel door frame. Side the stain scrapper encompassing the door frame until you contact one of the clips. Pull straight outside, gone from the door frame, to disengage the plastic clip from the door frame.
Instructions
Removing the Interior Door Panel
1. Remove the trim bezel that surrounds the inside door bail on your Nova. A miniature screw retains the bezel; manipulate a Phillips screwdriver to remove the screw. Then pull the bezel from the interior door panel.
2. End a GM window Eccentric person Emigration belongings to remove the window Eccentric person shaft. Affiliate the effects with the exercise, and slide the thing between the practice and the door panel. This Testament disengage the steel retaining clip and concede you to pull the application off the regulator shaft.
3. Remove the armrest. Its retaining bolts Testament be concealed under baby trim pieces along the inboard face of the armrest. Pry these off with a flat-head screwdriver. Then pull elsewhere the retaining bolts and remove the armrest.
4. Provided your Nova is equipped with remote clout mirrors, you must remove the plastic trim quota that houses the state Bump. Using a Phillips screwdriver, pull absent the singe screw that retains the trim piece, and remove the trim parcel.
5. Remove the interior door panel. Covered plastic clips retain the door panel.The Chevrolet Nova eponym refers to a compact machine produced from One thousand nine hundred sixty two to One thousand nine hundred seventy nine and a subcompact motorcar produced from One thousand nine hundred eighty five to 1988. Regular Motors produced both vehicles. Whether you own a Nova and a window is broken, you must remove the interior door panel to alter it. On older vehicles where the window glass is badly scratched, replacing the window glass Testament hugely embroider visibility for the Chauffeur. Linger encircling the door until all the clips are disengaged. Then lift the door panel straight up to seperate the top of the panel from the door, and remove it from the Nova.
Removing the Door Glass
6. Carefully remove the plastic hose deflector shield, which is held in domicile with tape. Simply pull it off; on the other hand be careful not to tear it.
7. Lower the window fully.
8. Remove the weatherstripping from encompassing the window by prying it absent with the flat-head screwdriver.
9. Practice a wrench to remove the bolt that connects the window regulator arm to the steel glass channel attached to the backside of the window glass.
10. Carefully lift the glass up nailed down the window opening, and remove it from the motorcar.
Installing the New Door Glass
11. Slide the steel glass channel off the mature window and onto the different window.
12. Carefully slide the advanced window into the opening at the top of the door.
13. Reinstall the bolt that connects the window regulator arm to the steel glass channel.
14. Reinstall the weatherstripping sorrounding the window opening by carefully urgent it into the channel in the window frame.
15. Reinstall the plastic saturate deflector shield. Convenience masking tape to secure it to the door frame.
Reinstalling the Interior Door Panel
16. Lower the interior door panel into position over the door. Make sure the tab at the top of the interior door panel engages the groove on the inside of the door at the bottom of the window opening.
17.Use the palm of your hand to press the plastic clips into the holes in the door frame. Continue around the interior until all the clips are pressed in.
18. Reinstall the plastic trim piece that houses the remote mirror control knob. Lift the trim piece into position, and reinstall the screw that retains it.
19. Lift the armrest into position, and reinstall the three screws that retain it. Then press the screw covers into the armrest.
20. Reinstall the window crank by pressing it onto the regulator shaft.
21. Slide the trim bezel into position around the interior door handle, and then reinstall the screw that retains it.
