The fuel pump is the feelings of the fuel delivery development.
When you commence having problems starting or driving your Dodge Company, one of the most big method checks is the fuel process. Whether fuel is not reaching the fuel injectors, then the headache could be a poor fuel pump. Fuel is supplied to the fuel injectors on a Dodge Caravan by an electric in-tank fuel pump.
Instructions
Dodge Caravan Fuel Pump Removal
1. Remove the anti battery cable from the battery.
2. Unscrew the fuel vehicle filler cap. Unscrew the cap from the fuel impulse attempt Harbour on the fuel condemn.
3. Apartment the bare cusp of the Fuel Impact Proceeds Hose item No. C-4799-1 into a petrol container. Abode a shop towel under the fuel Harbour.
Habitat jack stands on Everyone side under the frame. Slowly lower the Convoy until it rests on the jack stands.7. Disconnect the fuel filler hose. Change the cap.
5. Comprehend a fuel syphon hose into the fuel filler neck. Push the hose into the fuel vat. Withdraw the fuel receptacle into the Gauze container.
6. Uplift the rear of the Van with a jack.4. Connect the other extreme of the hose to the inspection Harbour. Remove the hose after the power has been released.
Disconnect the rubber vent hose at the fuel vat. Disconnect the work lines from the fuel pump.
8. Alteration the fuel pump module electrical connector to the unlock position. Push down on the retainer. Pull the connector off of the module.
9. Situate a transmission jack under the fuel container. Remove the fuel vehicle retaining bolts using a socket and ratchet. Remove the straps.
10. Lower the fuel receptacle a inappreciable. Remove the filler hose from the vat.
11. Detach the impact relief valve hose located at the front of the tank. Remove the clamp with a pair of pliers. Detach the fuel filler tube vent hose. Remove the fuel tank.
12. Wipe away debris from the top of the fuel tank using a rag. Remove the fuel pump lock nut with tool No. 6856.
13. Remove the fuel pump. Remove the O-ring. Discard the O-ring.
Dodge Caravan Fuel Pump Installation
14. Use a rag To cleanse the seal area of the tank. Install a new O-ring on the pump module.
15. Hold the fuel pump in place. Install the locking ring using tool No. 6856.
16. Fill the fuel tank. Install the filler cap. Connect the negative battery cable. Install the clamp.
17.Raise the tank into position. Work the filler tube onto the fuel tank.
18. Feed the filler tube vent line through the frame rail. Tighten the fuel tank strap and bolts using a socket and ratchet. Remove the jack.
19. Attach the fuel pump electrical connector. Place the retainer in the locked position. Install the fuel line.
20. Lift the Caravan with a floor jack. Remove the jack stands. Lower the Caravan to the ground.
21. Position the fuel tank on the transmission jack. Connect the pressure relief valve hose. Attach the fuel filler tube vent hose.
