Adding a establish of forward foot pegs on your Harley Davidson is a worthy bag to dilute leg enervate and access rider consolation on expanded hauls. Foot pegs are available in a combo of designs, colours and finishes and they mount on the engine guards for effortless installation. Interpret on to memorize mount foot pegs on a Harley-Davidson motorcycle.
Instructions
1. Fix upon the thickness of your engine guard tubing. Whether you don't be cognizant the breadth, you can apply a dial gauge or, provided one isn't handy, a parcel of Numb cardboard with cuts imaginary in the border at intervals of one-eighth of an inch. Simply fold the flaps down on the cardboard until you asset a orifice that fits environing your tubing.
2. Find a set of foot pegs that will fit the diameter of your engine guard. These are readily available from Harley Davidson retailers and many online stores. Take a seat and see how it feels. If it feels awkward, try a few other positions until you find one that feels natural.
The most common placement is just above the lower bend on the outside of the engine guard, but the length of your legs will ultimately determine where you need to put them.
4. Unscrew the bolt in the hinged clamp. Open the clamp and place it around the engine guard tubing. The foot peg should be perpendicular to the engine guard now.
5. Replace the bolt through the clamp and tighten it. Kuryakyn and JP Cycles are excellent online retailers and carry a wide variety of foot pegs.3. Decide where you are going to mount your foot pegs.
