Instructions
1. Elevate the punctured tire and trundle and field a jack stand underneath the lower discipline arm or axle housing, equitable endure the shove.Radial tires posses many designs, including directional and nondirectional tread patterns.Radial tires keep a ply that goes approximately the circumference of the tire at a 90-degree radius from the trundle. Plies are rubberized plastic cords that are layered between rubber layers to development vigour and durability of a tire. These tires are designed to ante up a smoother impel than bias-ply tires.
2. Remove the lug nuts and completely remove the circle from the vehicle.
3. Inflate the punctured tire to the manufacturer's recommended energy. Roll the shove until you fix the tire puncture. Allot the puncture straight upward for easier access.
4. Comprehend the tire reaming stuff into the puncture. Change the reamer back and forth inside the puncture to exposed the gap.
5. Insert a tire plug halfway through the pincers on a plug insertion tool. Push the plug through the hole until it is about 1/2 inch outside of the tire. Yank the tool with one quick pull. This causes the pincers to separate and leave the tire plug in the tire.
6. Mix a cup of water with a tablespoon of liquid dish soap. Pour the mixture over the newly inserted tire plug. If the tire is still leaking, you will see bubbles form around the hole. In this case, insert a second plug directly next to the first plug.
