Car brake repair is a do-it-yourself work whether you keep the fly tools and a inappreciable bit of forbearance in vehivle repair. You'll require an additional couple of helping hands and method to spend approximately half a age putting on a latest locate of brakes. Provided all you necessitate is shoes or pads, the employment takes less lifetime. Glance at on to memorize repair Car repair brakes.
The front two tires must be off the ground in order to remove them and repair the brakes.2. Remove the tires. Use the jack and lug nut remover that came with your car.
Instructions
1. Secure your vehicle and jack it up.Set your lug nuts aside with the tire for easy replacement.
3. Take off the brake cylinder and pads. Use a hydraulic wrench to remove the fittings and then slide the cylinder off. If you have drum brakes you'll need to remove the brake cover and take off the brake shoes.
4. Plug the brake line so brake fluid doesn't leak out all over the floor.
5. Install new pads and replace the cylinder. Turn the new brake cylinder as far as it will go by hand and then tighten down the bolts. Purchase the right pads and cylinders at your local auto parts supply store.
6. Bleed the brake line if needed after replacing the tires. Have the person helping you push on the brake pedal inside the car until braking feels normal.
