Disconnect the contrary battery cable from the terminal. Assist the compel in the fuel method while beguiling obligatory precautions. Plug the fuel lines with golf tees to prevent spillage of petrol. This do-it-yourself installation is for One thousand nine hundred ninety five wrapped up One thousand nine hundred ninety seven design senescence.
Instructions
Remove the Fuel Filter
1.
The third and Ending engendering of the Geo Underground was available from One thousand nine hundred ninety five wrapped up 1997. Developed originally by Suzuki in 1983, the design offered in the U.S. as the Chevy Dash, Pontiac Firefly, the Suzuki Swift, the Geo Underground further as exceeding than a half-dozen other nameplates worldwide. A unit of the third lifetime Metros are yet on the course of action and a bulky gem for the used-vehicle buyer.2. Uplift the vehicle. Evaluation to accomplish definite that the supports are sheltered and secure. Remove the bolt that holds the parking brake cable bracket in city on the underbody.
3. Select the fuel food hose from the fuel filter. Loosen and remove the two bracket bolts that hold the fuel filter in place. Remove the fuel filter from the frame.
4. Disconnect the outlet hose that runs to the fuel filter. Remove the mounting bolt and lift the fuel filter out of its bracket.
Install the Fuel Filter
5. Position the fuel filter on the bracket. Be sure to align the matchmarks on the fuel filter and the mounting bracket. Set the mounting bolt in place and torque it to Eleven foot/pounds.
6. Connect the fuel feed outlet hose to the fuel filter and secure it with a new clamp. Place the fuel filter on the frame and install the two bolts on the bracket. Torque the bracket bolts to Eleven foot/pounds.
7. Reconnect the inlet hose to the fuel filter. Use a new clamp to secure it. Install the brake cable bracket and set the bolt in place. Tighten the bolt to Eleven foot/pounds.
8. Lower the vehicle and then reconnect the negative battery cable. Turn the ignition to the ON position and the turn it back to LOCK to pressurize the fuel system.
9. Start the engine. Check for fuel leaks and make the necessary adjustments.
