Automobile video screens aren't fair-minded for ceilings and seat backs-you can install monitors in the sun visor of the passenger seat. These monitors are accessible to associate to an A/V selector box. Here's install them.
Instructions
1. Unbolted the hood and remove the battery cables from the van battery using a wrench or socket. Evaluation the vehicle's repair book for the correctly thing immensity.
2. Remove the virgin visors from your vehivle by unscrewing the screws in the mounting bracket, using the Correct screwdriver. Store these visors so you can change them provided you sell the motorcar consequent on.
Ally the visor housing's mounting bracket to the proper spot and tighten the mounting screws.4. Route an A/V power cable to each of the visor monitors.3. Satisfy the visor monitors. These should hog come preinstalled in the visor housing.
You can connect the monitors separately or use a two-into-one A/V connector to associate both monitors to the same jack on the A/V selector box. Connect an A/V power cable to the A/V cable on each of the visor mirrors. Use cable ties to keep your A/V cables from hanging.
5. Reconnect the battery and turn on the car. Switch the A/V selector box to the visor monitors. The monitors will turn on if you installed them properly.
