Moderate a Ford Ranger Slider Window
The slider window on a Ford Ranger pickup is in reality composed of four glass panes inside the rear window meeting. The larger panes on the left and deserved sides are constant. The centre third of the rear window assembly is comprised of two sliding panes that can be spread apart or locked cool to secure the vehicle. Whether one of the window panes has been damaged, the abundant rear window meeting must be removed from the vehicle for the broken pane to be replaced.
Instructions
Removing the Window From the Cab
Pull on the interior weatherstripping, while having your assistant press with the palm of his hand against the window. Continue around the window until it is pressed into position.
3. Challenge an assistant to stand in the Bedstead of the Motor lorry and buttress the window.
4. Pull the weatherstripping on the inside of the window meeting, elsewhere from the vehicle's protest using your handwriting.
5. Push the window assembly away wrapped up the rear of the cab using your fist. Assemble definite your assistant is there to cooperate it.
6. Disinfected the window opening in the cab using soap and irrigate.
Removing the Slider Windows
7.25. Pull the cord from the window frame.26
9. Unscrew the screws that secure the division bar on the genuine constant window pane to the window frame, using a Phillips screwdriver.
10. Pull both division bars from the window frame.
11. Pull the left slider window towards the right until it is centered between both fixed panels.
12. Spread the top and the bottom of the frame apart slightly by pulling them with your hands.
13. Lift the left slider window out of the window frame.
14. Pull the right slider window towards the left until it is centered between both fixed panels.
15. Spread the top and the bottom of the frame apart slightly by pulling them with your hands.
16. Lift the right slider window out of the frame with your hands.
Installing Slider Windows
17.Spread the window frame apart by pulling on the top and bottom of the frame with your hands.
18. Lay the right slider window into the frame and slide it all the way to the right.
19. Lay the left slider window into the frame and slide it all the way to the right.
20. Lay the division bars into position against the fixed window panes on each side of the frame.
21. Screw in the screws that secure the division bars to the frame, using a phillips screwdriver.
Reinstalling the Window in the Cab
22. Press a length of cord or rope into the flange crevice that surrounds the window frame. The flange crevice is where the weatherstripping secures to the steel window mounting flange on the cab.
23. Pull tight on both sides of the cord so that the interior side of the weatherstripping spreads away from the exterior side.
24. Guide the window frame into position from the bed of the vehicle. Have an assistant working inside the cab, make sure the interior side of the weatherstripping slides over the window mounting flange.
Frank the window.8. Unscrew the screws that secure the division bar on the left constant window pane to the window frame, using a Phillips screwdriver.
1. Unscrew the screws that secure the plastic interior mounding all over the rear window using a Phillips screwdriver.2. Pull absent any interior moulding surrounding the window meeting.
