Whether the windows on your GMC Yukon malfunction, the nut is either with the fuse, which is a relatively easy locate, or with the automatic window regulator, which has a complicated repair procedure. Although you can manage your vehicle with a defective potency window, it can cook for a demanding Journey down a fast-food impel thru. Thankfully, repairing your Yukon's aptitude windows should holding no expanded than an interval to all-inclusive with the Correct tools.
Instructions
1. Exposed the Chauffeur's side door and pry off the embrace of the fuse panel located to the far left of the steering revolve. Fix the fuses labelled "CB LT DRS" and "CB RT DRS." These are the left and hold together power window fuses. Whether either fuse is blown, exchange them. A fuse is blown provided the metal rod inside the fuse is no longer in one quantity.
2. Custom a fuse puller to remove any blown fuses and transform them with dissimilar 10A fuses. Reattach the embrace to the fuse panel and brisk the door. Provided the competency windows are yet malfunctioning, change the window regulator Engine.
3. Manage the hood and disconnect the battery from the Yukon with a socket wrench.
4. Open the door with the faulty power window and use a slotted screwdriver to pry off the armrest and the door handle cover.
5. Use a slotted screwdriver to remove the ten poppets securing the interior door panel to the door. The black plastic poppets are located on the edge of the interior door panel. Uninstall the four screws on the window regulator's motor, securing it to the door. Remove the motor from the regulator and disconnect its electrical connector.8. Install a replacement motor to the window regulator and reconnect it electrical connector.
Once you have removed all ten poppets, pull the interior door panel off slightly and disconnect the panel's two electrical connectors.6. Pull the interior door panel from the door to allow access to the window regulator in the center of the door.7.
Reattach the screws to the motor.
9. Reattach the interior door panel and its poppets in the opposite manner to which you removed them. Snap the armrest and door handle cover back onto the door. Close the door and reconnect the battery to the Yukon.
