Levy jack stands under the chassis and the axle. Capture off the rear wheels with the tire iron.2.
Instructions
1. Settle shove chocks on all sides of the front wheels on the Jeep Grand Cherokee. Lift the rear of the Jeep with the jack.
The rear objective on a One thousand nine hundred ninety five Jeep Cherokee is further called the rear axle. It is a critical allotment of the suspension operation also as the drivetrain owing to it plays a allotment in the rear wheels, which moves the Motor lorry forward or backwards. It as well holds the suspension of the Jeep in situate. Provided the rear extreme has a dilemma, it you can remove the rear extremity meeting from the Jeep to properly access all of the components.Unbolt the brake limit substantial from the front of the Jeep to the axle with a borderline wrench. Disconnect the emergency brake cable valuable to the brakes with the 3/8-inch ratchet and socket.
3. Unbolt the shocks from the backside of the rear head and the underside of the chassis with the 3/8-inch ratchet and socket, then pull the shocks off of the suspension. Unbolt the driveshaft from the rear head with the 3/8-inch ratchet and socket.
4. Settle the jack underneath the axle and lift up the rear location again until it just lifts off of the stands. Unbolt the U-bolts securing the springs to the rear end with the 3/8-inch ratchet and socket. Unbolt the lower control arms from the rear end with the 3/8-inch ratchet and socket.
5. Remove the jack stands from under the rear of the Jeep and lower the jack. Slide the jack out from under the rear end, taking the axle out with the jack.
