Motorcycle clutch handles are located on the apply bars.
Motorcycle clutch levers are used to transform the gears of an engine. The clutch lever is located on the left handlebar of the bike. For some bodies, the distance from the clutch to the handlebar is besides big league for the vastness of their hands and the lever needs to be adjusted for cooperate of convenience. A clutch Testament further necessitate to be adjusted provided the clutch cable collapses during call, or provided the clutch spring binds and won't uncoil. An improperly adjusted clutch Testament basis the clutch to slip and beget it solid to shift gears.
Loosen the two lock nuts of the adjuster with the socket wrench. Turn the cable adjuster screw and check the clutch lever as you turn. Tighten the adjuster screw until the clutch lever will wiggle loosely or "play" about 1/8-inch. Tighten the lock nuts.5.
Tighten the adjuster screw until it won't turn any exceeding.
2. Remove the left frame include of the item of the bike and place it aside in a sheltered situate. Remove the bolts holding the secondary gear case involve and the clutch Proceeds contain with a socket wrench. Remove the secondary gear occasion and clutch release cover and establish them aside.
3. Find the lock nut and screw located at the lower end of the clutch assembly cable. Loosen the lock nut. Loosen the screw by three rotations. Slowly finger tighten the adjusting screw until you start to feel resistance. Loosen the screw a quarter-rotation. Tighten the lock nut to hold it in place.
4. Locate the lower cable adjuster above the clutch release cover.
Instructions
1. Pull back the rubber comprehend of the clutch lever to disclose the lock seed and adjusting screw. Loosen the lock follower with a wrench.Tighten the lock nut of the clutch lever. Replace the clutch release, secondary gear case and left frame cover. Pull the rubber cover back over the clutch lever.