The Chevrolet S-10's tail gate hook is held on to the tail gate buttoned up a infrequent screws. Once you remove the screws, you can proceeds away the tail gate and disassemble it to repair or alternate the locking cylinder. Assembling the tail gate hasp is a quite no sweat operation and you should expect to spend no also than twenty minutes performing the assignment.
4. Remove the retaining bolts from the lock assembly and pull it out of the truck.
Assembly
5.Unbarred the tail gate and advantage a Phillips screwdriver to remove the screws from the tail gate embrace plate.
2. Pull the tail gate cover plate off the tail gate. Disconnect the tailgate shaft government rod from the bail with the slotted screwdriver.
3. Pull the employ away and disconnect the left and right latching rods from the lock assembly.
Instructions
Removal
1.Place the latch lock assembly back into the truck and secure it by reinstalling the retaining bolts.
6. Reattach the left and right latching rods to the lock assembly and place the handle back into the tail gate.
7. Reattach the tail gate cover plate and close the tail gate.
