This is called clear flood mode. On a carbureted engine, this allows maximum air flow into the engine to help vaporize the fuel.3.
1. Turn the ignition indispensable off and let the vehicle sit for five minutes. This allows heat extant in the engine to help vaporize the fuel in the cylinders and on the spark plugs.
2. Hold the throttle pedal to the floor. Turn the ignition key to the start position and crank the engine for no more than Thirty seconds, keeping the throttle pedal to the floor. Cranking for more than Thirty seconds can damage the starter. On a fuel injected engine, the on-board computer will see the throttle open while cranking and shut off the fuel flow to the engine.
When your motorcar's engine becomes flooded with fuel, the Glimmer plugs develop into wet and the expedient Glimmer to inflame the air/fuel alloy is shorted to ground instead of jumping the Glimmer plug orifice and igniting the compound. Clearing the fuel-flooded contingency To admit ignition is a episode of allowing expanded air into the engine until the Glimmer plugs are dry and commence to operate properly.Instructions
If the engine does not start, turn the ignition key to the off position and wait two minutes. Repeat the process until the engine starts.
