You don't enjoy to be a acknowledged mechanic to establish the brakes on your Honda Civic.
While the Honda Civic includes six air bags, an Contemporary Compatibility Engineering target constitution, active purpose restraints and an anti-lock braking step, these safety features rapacious babyish provided the Chauffeur is unable to safely point the vehicle due to worn brake pads. Whether your Civic isn't time to come to a halt as quickly as it once did, or provided you hear a grinding sound every future you use the brakes, the age to modify the brake pads is immediately. Happily, doing so won't split your bank -- providing you achieve the bullwork yourself.
Instructions
1. Arena your Honda Civic on a Apartment lodgings, preferably paved, surface.
2. Appropriate the fix of wheels you'll be working on basic -- either the front or back -- and loosen Everyone spin's lug nuts with a tire iron or a lug follower wrench.
3. Settle a floor jack under the vehicle, positioning it so it comes into contact with the frame when it's raised.
4. Jack up your Civic eminent Sufficiently to slide a jack stand under it. Lower the vehicle onto the jack stand and repeat on the other side.
5. Capture the spin you'll be working on antecedent and remove its lug nuts.
6. You'll jewel the caliper, which houses the brake pads, clamped encircling an upper piece of the rotor.
13. Secure the caliper by tightening the caliper bolts with a socket wrench.14. Return the wheel to your Civic and secure it by tightening the lug nuts with a tire iron or lug nut wrench.
8. Lift off the caliper. Now it Testament carry on attached to your Civic by road of the brake line, you won't be able to set it down -- and letting it hang can damage the brake line. So secure it to the shock absorber or inner wheel well with a rope or bungee cord.
9. Remove the old brake pads from inside the caliper. Behind the outer brake bad, you'll find the piston, which will likely be partially extended to compensate for the worn pads.
10. Retract the piston by turning it clockwise with a piston tool or a large, flat-head screwdriver.
11. Apply a small amount of brake grease to the backs of the new pads. Be careful not to receive any grease on the sides of the brake pads that come into contact with the rotor.
12. Insert the new brake pads into the caliper and return the caliper to its original position on the rotor.
Grasp the tire with both hands and pull it toward you to remove it from the rotor. Doing so Testament explain the caliper, which you'll gem seated environing an upper parcel of the rotor.7. Remove the two bolts holding the caliper in distance with a socket wrench.
15. Repeat steps Five through Fourteen for the opposite side.
16. Lift your Civic off the jack stands using a floor jack, remove the jack stands and lower the vehicle to the ground.
17.Repeat the entire process for the remaining two wheels, if necessary.
